Winco HPS9000VE/C Bedienungsanleitung PDF herunterladen (Seite 14)

PTO Generators

WINCO has been manufacturing Power Take-Off (PTO) generators since the 1940’s. Over the years

WINCO generators have proven their reliability by logging millions of hours during power outages.

WINCO has grown to be the largest PTO manufacturer in the United States and manufactures PTO

generators suitable for everyone from the hobby farmer to large agricultural operations.

At WINCO we are a lot more than a generator assembler. Every PTO generator from 25kW to 75kW is completely

manufactured in Le Center, Minnesota. Complete control over the manufacturing process from start to nish allows us to build

and closely monitor the quality of each component of every WINCO PTO generator. The W15PTOS and all models 85kW and

larger are assembled in our Minnesota factory and thoroughly tested.

All gearboxes and shells arrive at the factory as raw steel and castings. The •

steel is welded and machined to tolerance. Each gearbox is bored to within +/-3/1000”

as a mated pair to ensure proper shaft alignment.

The stators and rotors start the manufacturing process as raw stamped steel. The laminations are stacked, •

aligned, and then welded. Each rotor shaft is turned in house before the rotor laminations are hydraulically

pressed onto the shaft. All stator and rotor windings are generously wound with 100% copper wire increasing

generator efciency while improving motor starting. The windings are then epoxy dipped and baked to insulate

the stator and rotor. The rotor is carefully balanced to ensure even rotation.

All exposed steel components are powder coat painted to ensure long life by •

protecting the part from corrosion.

The rotor, stator and electrical boxes are assembled by knowledgeable staff. •

Each generator is tested under full load for 15-20 minutes to ensure proper

operation and performance.

Multi-Spindle drills ensure

precise hole alignment.

Automated rotor winding

machine.

Completed rotor ready for

the epoxy dip.

Gearcase with

helical gears.

Heavy Duty Construction:• Each generator is built with a solid steel (W15PTOS is aluminum) shell to protect the stator and rotor from damage

and to dissipate heat. All models have steel mounting feet to facilitate trailer mounting, foundation or three point hitch installation.

Heavy Duty Gearboxes:• All gearboxes are constructed of cast steel. Winco does not use any aluminum gearboxes. All gears are of a helical

design to reduce noise and metal stress while operating much smoother than spur gears.

Lifting Eye:• Each generator comes with a lifting eye to aid in installation and storage.

Sealed Bearings: • All bearings are sealed designs that are maintenance free.

Mainline Circuit Breaker:• All models include a high quality Square D circuit breaker.

Full Power Receptacle and Plug:• Each generator from 60-350 amps includes standard a full power receptacle and

mating plug. Additional convenience receptacles are also provided.

Rodent Screen:• All models are rodent proof.

Buck-Boost Transformer: • Each model 35 kW to 75 kW comes standard with a buck-boost transformer. The buck-

boost transformer holds voltages higher during heaving motor starting which increases the starting capability of WINCO

PTO generators over automatic voltage regulator controlled models. To illustrate the improved

motor starting, the 75FPTOC-4 is capable of starting the same motor load as the WINCO

AVR controlled W105FPTOT. See the chart for motor starting capacity by model.

Automatic Voltage Regulator (AVR):• All models 85kW to 165kW have an AVR to

electronically control excitation and maintain voltage to +/-2%.

Copper Windings:• All windings are 100% copper.

PTO Safety Shield:• Every PTO generator comes with a factory installed steel safety shield

to protect the operator.

Accessories:• WINCO offers a complete line of PTO accessories including PTO shafts,

trailers, three point hitch kits and manual transfer switches. Contact your sales representative

for availability and compatibility details.

TPH240 w/25PTOC-3

FeaturesandBenets

Domestically Manufactured

PTO Trailer

25PTOC-3

35-75 kW

85-165 kW

Winco Manufactured Transformer

1 2 ... 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Winco HPS9000VE/C Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Stromgeneratoren Winco HPS9000VE/C